MoIP configuration for Pakedge MS Series Switches

Note: Enable these settings on every managed switch on the network, unless a step specifically states it is for a core switch.

  1. Navigate to Advanced > IGMP Snooping > Configuration. 

  1. Set IGMP Snooping Global Configuration and Status to Enable, then click Apply at the top of the page.

    Graphical user interface, text, application, email Description automatically generated 

  1. Move to the VLAN Status page and click the Options button to Add a VLAN entry. 

    Graphical user interface, text, application Description automatically generated 

  1. Select the VLAN ID the MoIP devices are configured on and set Fast Leave to Disabled for all switches.

    Graphical user interface, application Description automatically generated

  1. Click Add, then Apply at the top of the page. 

  1. Click the Multicast Router VLAN Configuration tab. Toggle MRouter Learning on for all ports, then click Apply. 

Note: In Pakedge MS switch Firmware v1.03.0 and earlier, in a multi-switch MoIP topology, MoIP traffic between switches may not traverse as expected when using an MS switch as the core switch. The toggle may indicate that MRouter Learning is enabled, even when it is not.
A firmware update is in development to resolve this issue.

  1. Go to Advanced > Unregistered Multicast Behavior > Configuration. 

  2. Set UnregisteredMulticast Behavior Configuration to Drop, then click Apply.

    Graphical user interface, text, application Description automatically generated 

  3. If you see an entry for EXC_default_list under the Exceptions list, continue to the following steps. If not, your configuration is complete. 

  4. Click the Interface Configuration tab, then click Options, and Edit. 

    Graphical user interface, text, application, email Description automatically generated

  1. Select each entry for EXC_default_list. If that’s each entry in the list, click the box next to Interface to select all. Then click Edit Selected. 

  1. Click the “x” in the EXC_default_list object to delete it. 

    Graphical user interface, text, application, email Description automatically generated 

  2. Click Save, then Apply at the top of the page.

Core MoIP swich configuration

  1. Navigate to Advanced > IGMP Snooping Querier > Configuration. Click Enable and very the IGMP Version is set to V2. Then click Apply. 

Application Description automatically generated with low confidence

  1. Navigate to Advanced > IGMP Snooping Querier > VLAN Configuration, then click the Options button to Add an entry. 

  2. Leave Querier Election Participation at Disabled and the Querier VLAN IP Address at 0.0.0.0. 

  3. Click Add, then click Apply at the top of the page.